+8616630809359

Latest Products

  • Pipe Supports For Insulated Pipe
  • Cold Insulation Pipe Supports
  • Chilled Water Pipe Support
  • Insulated Pipe Supports
  • Cryogenic Pipe Support
  • Removable Insulated Pipe Support

Contact Us

  • East side of Zhengqiang Road, Zhenggang Economic Development Zone, Yanshan County, Cangzhou City, Hebei Province
  • della@cangzhouzhiang.cn
  • +8616630809359
Chilled Water Pipe Support

Chilled Water Pipe Support

• Our chilled water pipe support separates cold pipework from supporting steel.
• Its split insert follows the pipe outside diameter and specified insulation thickness.

Description

Our chilled water pipe support carries a water-filled service line through a rigid insulating insert enclosed by a steel clamp. The insert forms a thermal break at the bearing position, interrupting the conductive path between the cold pipe and its support. Its axial bearing length distributes the local reaction over a defined contact area, helping the line insulation retain its shape at the clamp. The enclosure holds the sections together while the base transfers the vertical reaction to the building frame. Where the insert joins the surrounding insulation, matching profiles leave space for a continuous vapour seal. The completed assembly combines a defined load path with an insulated transition through the support location.

 

Components

 

Polyurethane sections: two mating halves with a bore matching the specified carrier pipe.

Clamp halves: steel shells joined through side lugs accessible after positioning.

Seat and fasteners: a bearing base and bolted connections sized for the receiving support.

 

Product Advantages

 

 
 

 

The removable upper half provides access to the carrier pipe without cutting a welded support attachment from its wall.

 
 
 

 

The elevated bearing keeps the external jacket clear of sharp edges on the structural steel.

 
 
 

 

Individual support marks allow completed assemblies to be reconciled with their installation positions.

 

 

 

Main Applications

 

• Central air-conditioning supply and return lines with a chilled water pipe support at each designated bearing position.

• Plant-room headers connecting chillers, pumps and heat exchangers, where space around strainers, flanged joints and equipment connections must remain accessible.

• Refrigeration utilities serving food, pharmaceutical and chemical facilities.

 (5).jpg
.jpg
FAQ

Q: Does DN50 mean a 50 mm outside diameter?

A: Under common steel pipe dimensional standards, DN50 corresponds to NPS 2 with a 60.3 mm outside diameter. Confirm the specified standard before sizing the insert.

Q: How should a chilled water pipe support be stored?

A: Store it above ground in a covered area, retaining its original protective packaging until fitting. Exposed polyurethane surfaces need protection from rainwater and direct sunlight.

Q: Does this assembly replace pump vibration isolation?

A: Vibration isolation for pumps and other rotating equipment needs its own specified arrangement.

 

 

 

Hot Tags: chilled water pipe support, China chilled water pipe support manufacturers, suppliers, factory, Hot Insulation Pipe Support, insulated pipe support , Magnesium Steel Insulation Pipe Bracket, Power Plant Pipe Supports, Pre Insulated Pipe Supports, Thermal insulation pipe support

Send Inquiry

(0/10)

clearall