Products

A removable insulated pipe support is used when the pipe support point may need later inspection or part replacement. It is made with separable clamps, bolts and an insulation bearing part. Workers

A high temperature pipe insulation support is used on steam, hot water, thermal oil and other heated pipe lines. The pipe expands when temperature rises. The support must carry the load and leave

An industrial insulated pipe bracket is used in plant pipe racks, utility stations and process pipe lines. It holds the pipe at a fixed height and keeps the insulation layer from being crushed by the

A thermal insulated pipe support is used where the pipe cannot touch the steel frame directly. It keeps the load on the support. It also keeps the insulation layer continuous at the bearing point.

Use type: suspended support for vibration control.vibration isolation hangers are used around fans, pumps, ducts, and pipe lines where vibration transfer should be reduced.

Support form: overhead pipe or duct hanger. The suspension hangers are used with rods, beam clamps, pipe clamps, nuts, and brackets according to the site layout.

Product group: pipe support with spring movement control.spring supports are used when ordinary rigid brackets cannot handle pipe travel or load change.

Support type: spring-loaded pipe support for vertical pipe movement. The spring pipe supports are selected by load, travel, support height, and pipe insulation data.

Product type: spring hanger with isolation function.spring isolation hangers support suspended loads while reducing vibration transfer to the building or steel structure.

Connection type: spring unit with shackle-style hanging link.shackle springs are useful where a rod, lug, or eye connection is easier than a flat support plate.

Part type: working spring for pipe hanger assemblies. The hanger spring is selected by spring rate, load range, travel, and available hanger space.

The PTFE Lined Pipe Shoe is made for pipe runs where the support point has to carry load without damaging the insulation layer. It is normally ordered by pipe outside diameter, insulation thickness