+8616630809359
  • 16/Nov

    2026

    Pipe Galleries Need Better Coordination

    Inside a municipal pipe gallery, a support can seem like a minor piece of steel. Yet the corridor has to accommodate several services, access routes and future inspections withi...

  • 16/Nov

    2026

    Cold Pipe Supports Move Up The Checklist

    Pipelines carrying liquefied natural gas create a quiet design problem long before the first valve is opened. A cold line needs support, yet the contact points must also be cons...

  • 16/Nov

    2026

    Sliding Supports For Long Steam Runs

    Steam pipelines rarely stay at their installation length. As temperatures rise, pipe sections expand and the support points must accommodate the movement allowed by the piping d...

  • 16/Nov

    2026

    Red Pine Pipe Supports: Questions Worth Asking

    A red pine cold pipe support can look simple in a product photograph. The important details sit at the interfaces: where the pipe meets the support, where the support rests on t...

  • 02/Nov

    2026

    Matching Pipe Supports To Restraint Layouts

    Insulated pipework can use sliding, guided and fixed supports along the same route. Each position has a different job, so our fabrication work follows the support schedule and a...

  • 02/Nov

    2026

    Split Clamps Leave Room For Maintenance

    Our chilled water bearing uses a split steel enclosure with bolted side lugs. The upper half can be detached without cutting a welded support attachment from the carrier pipe, g...

  • 02/Nov

    2026

    Reading Cold Support Test Results

    A material report for a cold pipe support needs to be read one property at a time. Our polyurethane data place specified limits beside sample values, so acceptance starts with t...

  • 02/Nov

    2026

    Checking Vapour Seals Before Cooling A Line

    The steel clamp can look complete while the cold insulation detail still needs work. Before a refrigerated line is cooled, check the joints around each support insert, including...

  • 17/Sep

    2026

    Why Timber Still Appears in Low-Temperature Pipe Supports

    A timber insulation block might look old-fashioned beside modern piping materials, but treated red pine is still useful where a support needs low thermal conductivity and enough...

  • 17/Sep

    2026

    Cryogenic Support Selection For LNG Piping

    Low-temperature piping moves less predictably than an ordinary utility line because the metal, insulation, and supporting steel all react to a large temperature difference. A su...

  • 17/Sep

    2026

    Planning Sliding Supports For Thermal Movement

    Long pipe runs could move several millimeters or more as temperature changes. If that travel is ignored, the support could bind, the pipe could lift, or unwanted force might be ...

  • 17/Sep

    2026

    Cold Shoes: Keeping Load Paths And Thermal Barriers Separate

    A cold shoe does two jobs that compete with each other: it has to be stiff enough to carry the line, yet it must not create an easy path for heat to reach the cold pipe. Cold Sh...

First 1234 Last 1/4