+8616630809359

Split Clamps Leave Room For Maintenance

Nov 02, 2026

Our chilled water bearing uses a split steel enclosure with bolted side lugs. The upper half can be detached without cutting a welded support attachment from the carrier pipe, giving the assembly a defined access point for inspection and maintenance. The base carries the vertical pipe reaction down to the building frame beneath the assembly.

In a plant room, that access depends on the surrounding equipment layout. Strainers, flanges and connections to chillers or heat exchangers may all need attention after installation. A support placed too close to those items can obstruct the very area the maintenance team needs to reach. Clearance around the enclosure therefore belongs in the layout review.

The bearing also raises the insulation jacket above the receiving steelwork. This keeps the covering away from sharp structural edges at the support position. Space beneath the jacket should remain visible during site checks, especially where adjacent services make the lower part of an assembly difficult to see.

Individual support marks help link each completed unit to its installation position. Keep those references readable so a service team can identify the relevant assembly before planning work. For our bolted supports, maintenance access means room to approach the fasteners, lift the removable section and work around nearby equipment connections. Those practical clearances deserve attention before the plant room becomes crowded.

Send Inquiry