Latest Products
Contact Us
- East side of Zhengqiang Road, Zhenggang Economic Development Zone, Yanshan County, Cangzhou City, Hebei Province
- della@cangzhouzhiang.cn
- +8616630809359
Spring Pipe Supports
Support type: spring-loaded pipe support for vertical pipe movement. The spring pipe supports are selected by load, travel, support height, and pipe insulation data.
Description
The spring pipe supports are used on hot, cold, or insulated pipelines that need load support while still allowing controlled vertical movement. The spring inside the support carries the pipe weight during cold and hot working states, so the pipe is not forced into a fixed seat when it expands or settles. They are common in power plant piping, process pipelines, steam lines, and large mechanical rooms where the pipe load may change after operation starts.
Product Parameters
|
Parameter |
Value |
|
Product form |
Spring hanger or pipe support assembly |
|
Main material |
Carbon steel body with spring steel parts |
|
Surface finish |
Painted, hot-dip galvanized, or project coating |
|
Load data |
Made according to cold load, hot load, and movement travel |
|
Connection |
Rod, lug, clamp, base plate, or shackle connection |
|
Use area |
Pipe rack, power plant, mechanical room, HVAC or industrial line |
|
Drawing check |
Pipe size, support height, movement direction, and installation space |
Product Advantages
Load and travel data can be matched with the pipe calculation sheet, so the support is not chosen only by pipe diameter. This helps avoid under-supporting insulated or high-temperature lines.
The travel scale and position mark make later inspection easier. Workers can compare the cold and hot position on site instead of removing the whole support.
Base type, clamp type, rod type, and guide type details can be adjusted by drawing, so the spring pipe supports can fit floor-mounted, suspended, and guided layouts without changing the pipe route.
FAQ
Q: Can they be used with pipe shoes?
A: Yes. They can be matched with pipe shoes, clamps, bases, or guide plates when the drawing leaves enough seat width and movement space.
Q: Why is travel data needed?
A: Travel data shows how far the pipe may move between cold and hot working states. Without this data, the spring may sit too high, too low, or reach the end of its working range.
Q: What should be checked before shipment?
A: Load mark, travel mark, connection size, support height, coating surface, and packing label should be checked so the spring pipe supports can be sorted faster after arrival.
Hot Tags: spring pipe supports, China spring pipe supports manufacturers, suppliers, factory, Constant Spring Hanger Support, Double Spring Support Hanger Pipe Bracket, spring hanger, Spring Hanger Pipe Supports, Spring Loaded Pipe Supports, Variable Spring Pipe Support
You Might Also Like
