+8616630809359

Contact Us

  • East side of Zhengqiang Road, Zhenggang Economic Development Zone, Yanshan County, Cangzhou City, Hebei Province
  • della@cangzhouzhiang.cn
  • +8616630809359

Installation Precautions for Cold-Insulated Pipe Supports

Aug 11, 2025

When installing cold-insulated pipe supports, pay attention to the following points:

1. **Installation Location**: The pipe support position must be precisely determined based on the pipeline route and design requirements. Ensure it is located at a critical location supporting the pipeline and that spacing complies with design standards to ensure uniform stress distribution on the pipeline and avoid stress concentration.

2. **Foundation Preparation**: The foundation surface at the installation location must be flat, solid, and free of debris and oil. If the foundation is uneven, level it to prevent the pipe support from tilting or becoming unstable after installation.

3. **Fixed Pipe Support**: Use appropriate fixing methods, such as bolting or welding, to ensure a tight connection between the pipe support and the foundation or support. Bolts must be tightened, and welding must be quality-certified to prevent the pipe support from loosening or falling off.

4. **Insulation Treatment**: During installation, ensure the insulation layer of the pipe support is protected from damage. If the insulation layer is damaged, repair it promptly to ensure effective cooling.

5. **Pipe Connection**: The connection between the pipe support and the pipe should be tight and snug, avoiding gaps to minimize cooling loss. Also, consider the thermal expansion and contraction of the pipe, leaving some room for expansion.

Send Inquiry